![sherlogo[1]](Accessory%20&%20Chuck%20Prices_files/image005.gif)
ACCESSORY INFORMATION &PRICES
Prices updated April 2016
|
|
|
|||
|
Accessories used with the lathe are shown with the part number in red |
|
|||
|
PART NO. |
PRODUCT NAME AND USE |
WT/KG |
PRICE A$ |
|
|
1012 |
SENSITIVE
DRILLING ATTACHMENT (Threads
onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand
using a bearing supported knurled collar. Provides quick action and great
"feel" when drilling small holes.) |
0.9 |
$202.96 |
|
|
1074 |
STEADY
REST (Supports
the end of long work for centre drilling) |
0.34 |
$83.82 |
|
|
1090 |
FOLLOWER
REST
(Supports thin work, keeps it from deflecting away from the cutter, moves
with the lathe saddle to "follow" the work) |
0.34 |
$130.01 |
|
|
1150 |
WW
LEVER COLLET CLOSER |
1.00 |
$461.58 |
|
|
1160 |
WW
COLLET SET (Metric
P/N 1178) (P/N 1161 included in set) (Collets are like small, individually
sized chucks for holding a specific diameter tool or material. WW collets
have a hole through the collet and drawbar to
accept long material. Traditionally used by watch and clock makers. Sherline
WW collets have a .312-.313 body size and .275-40 thread.) |
0.23 |
$158.54 |
|
|
116000 + size |
WW
COLLET, CUSTOM SIZE (Custom size collets can be ordered in sizes from .050" to
.320" or 1.28 mm to 8.13 mm. For example, a custom collet
might be ordered as 116000 0.100" or 116000 2.75 mm.) Custom collets are
not laser engraved with size information. Allow 3 weeks for delivery. |
0.023 |
$77.46 |
|
|
116000 |
WW
COLLET BLANK,
Large Head |
0.023 |
$32.80 |
|
|
1160001 |
WW
COLLET BLANK,
Small Head |
0.023 |
$32.80 |
|
|
116001 |
1/64"
WW COLLET |
0.023 |
$77.46 |
|
|
116002 |
1/32"
WW COLLET |
0.023 |
$65.13 |
|
|
116003 |
3/64"
WW COLLET |
0.023 |
$48.20 |
|
|
116004 through 116020 |
WW
COLLETS from size 1/16" to 5/16" by 64ths. The part number is given as 1160__
plus the number of 64ths to denote size. For example, 13/64" is P/N
116013 and a 1/4" collet (16/64") is P/N 116016. |
0.023 |
$42.03 |
|
|
1161 |
WW
COLLET ADAPTER & DRAWBAR (Included in collet set. Adapts WW taper to
#1 Morse taper of Headstock) |
0.23 |
$96.94 |
|
|
1162 |
DELUXE
WW COLLET SET
(Inch) (17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in
wooden case) |
1.36 |
$466.14 |
|
|
1163 |
8.0
MM COLLET ADAPTER & DRAWBAR (WW collets vary somewhat depending on
manufacturer. This adapter holds those with a .314-.315 body size) |
0.223 |
$104.64 |
|
|
1164 |
WW
COLLET FIXTURE
(Allows WW collets with .312-.313 body to be held on face of rotary table or
mill table.) |
0.45 |
$186.19 |
|
|
1165 |
8.0
MM COLLET FIXTURE (Allows WW collets with .314-.315 body to be held on face of rotary
table or mill table.) |
0.45 |
$201.57 |
|
|
1170 |
OAK
WW COLLET STORAGE BOX (A high quality storage box that holds up to 22 WW collets plus collet pot chucks, drawbar, knockout bar and WW collet adapter. Bevelled corners & brass hardware. |
0.45 |
$62.98 |
|
|
1171 |
OAK
WW COLLET STORAGE BOX (A high quality storage box that holds up to 96 WW collets. Bevelled
corners, brass hardware, oak insert with 96 holes, satin lacquer finish.) |
0.45 |
$73.76 |
|
|
117803 |
.3
mm WW COLLET |
0.02 |
$77.46 |
|
|
117804 |
.4
mm WW COLLET |
0.02 |
$77.46 |
|
|
117805 through 117808 |
WW
COLLETS from size .5mm through .8 mm by .1 mm increments. The Part number is given as
11780 plus the collet size in .1 mm. For example, a
.6 mm collet would be P/N 117806 |
0.02 |
$77.46 |
|
|
117809 through 117814 |
WW
COLLETS from size .9mm through 1.4 mm by .1 mm increments. The part number is given
as 11780_ or 1178__ plus the collet size in .1 mm.
For example, a 1.1 mm collet would be P/N 117811. |
0.02 |
$65.13 |
|
|
117815 through 117880 |
WW
COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments. The part number is given
as 1178__ plus the collet size in .1 mm. For
example, a 6.4 mm collet would be P/N 117864. |
0.02 |
$42.03 |
|
|
1179 |
DELUXE
WW COLLET SET
(Metric) (14 collets, pot chucks, etc. in wooden case. P/N 1161 included in
set) |
1.36 |
$419.95 |
|
|
1180 |
COMPLETE
METRIC WW COLLET SET with 78 collets sized from .3 mm to 8.0 mm by .1 mm increments plus a
blank collet. The set is contained in a P/N 1171
oak collet box with 96-hole oak insert. |
1.81 |
$1,491.62 |
|
|
1182 |
BULL
NOSE LIVE CENTRE (Supports tubing or stock with a large end hole when turning between
centres. Dual preloaded bearings.) |
0.34 |
$145.41 |
|
|
1185 |
VERTICAL
MILLING TABLE
(Metric P/N 1184) (Mounts to lathe or mill table to move work up and down.
Has 2.25" of vertical travel and 8" long table.) (Metric P/N 1184) |
1.13 |
$222.91 |
|
|
1187 |
CHUCK-TO-T-SLOT
ADAPTER
(Allows 3- or 4-jaw chuck to be quickly screwed to mill table.) |
0.03 |
$19.79 |
|
|
1191 |
LIVE
CENTRE (Ball
bearings allow centre to rotate with part to reduce friction when turning
between centres) |
0.11 |
$79.27 |
|
|
1299 |
EXTENDED
MILL HEADSTOCK spacer |
1.00 |
$109.73 |
|
|
1201 |
ADJUSTABLE
LIVE CENTRE
(Ball bearing live centre adjusts for perfect cantering of headstock and
tailstock) |
0.23 |
$120.05 |
|
|
1202 |
ADJUST.
TAILSTOCK CHUCK ARBOR (Allows perfect cantering of tailstock chuck in relation to
headstock) |
0.23 |
$89.24 |
|
|
1203 |
ADJUST.
TAILSTOCK TOOL HOLDER (Allows perfect cantering of round tools held in tailstock) |
0.23 |
$89.24 |
|
|
1206 |
ADJUST.
TAILSTOCK 1” DIE HOLDER w/ 13/16” bushing (Allows perfect cantering of 1” or 13/16” threading
dies) |
0.23 |
$112.35 |
|
|
1220 |
TAILSTOCK
SPINDLE EXTENDER (Designed for lathes built before July, 1996 to extend reach of
tailstock spindle over table. Not needed on newer lathes) |
0.23 |
$81.54 |
|
|
1230 |
#0
MORSE ARBOR TO ¾-16 CHUCK THREAD ADAPTER (Allows a 3- or 4-jaw chuck to be mounted on the
tailstock spindle) |
0.23 |
$81.54 |
|
|
$0.00 |
||||
|
$0.00 |
||||
|
1270 |
COMPOUND
SLIDE
(Redesigned, Replaces P/N 1080) (metric P/N 1280) (An alternate and more
traditional way of turning tapers) |
0.45 |
$216.98 |
|
|
1272 |
COMPOUND
SLIDE RISER BLOCK (Raises compound slide about 1” for use on front side of crosslide with riser blocks in place on lathe) |
0.23 |
$73.84 |
|
|
1280 |
COMPOUND
SLIDE (Metric)
An alternate and more traditional way of turning tapers |
0.45 |
$216.98 |
|
|
1288 |
RISER
ROCKER TOOL POST (Taller tool post for use with riser blocks in place on the lathe) |
0.23 |
$81.54 |
|
|
1289 |
RISER
3/8” INSERT TOOL POST (Taller tool post for holding 3/8” shank tools with riser blocks in
place on the lathe.) |
0.23 |
$81.54 |
|
|
1290 |
STEADY
REST RISER
(Lifts steady rest to match headstock when spacer block is in place. Used
mainly by those who leave spacer blocks in place at all times on their lathe.) |
0.11 |
$94.67 |
|
|
1291 |
SPACER BLOCK KIT
(Lifts headstock 1.25” to allow parts up to 6” diameter to be turned.
Includes extended riser rocker tool post) |
0.68 |
$136.82 |
|
|
1292 |
TAILSTOCK
RISER BLOCK
(Lifts tailstock 1.25” for turning between centres with headstock riser block
in place) |
0.45 |
$101.48 |
|
|
1296 |
CUT-OFF
TOOL HOLDER RISER BLOCK (Lifts cut-off tool P/N 3002 for use with riser blocks in place. Used
with tool upside down on back side of crosslide
table.) |
0.223 |
$96.94 |
|
|
1297 |
MILL
HEADSTOCK SPACER BLOCK (Same as riser block for
lathe, but without tool post. Adds 1.25” of throat distance when milling) |
0.34 |
$91.52 |
|
|
1300 |
MILL
COLUMN SPACER BLOCK (Raises column base 2” for greater Z-axis clearance. Includes longer
bolts for mounting.) |
0.68 |
$90.63 |
|
|
2045 |
HEX
AND OCTAGON INDEX BLOCK SET (Fits in mill vice to allow simple indexing of 2, 3, 4, 6 or 8 sides or
hole patterns) |
0.9 |
$125.96 |
|
|
2049 |
SPINDLE
HAND WHEEL
(Used to rotate the headstock spindle much like the large hand wheel on a
sewing machine is used) |
0.68 |
$98.33 |
|
|
2083 |
WW
COLLET 1” BLANK (Make your own custom tool holder or collet
that is held with the WW adapter and drawbar) |
0.023 |
$62.15 |
|
|
2085 |
WW
COLLET TAILSTOCK ADAPTER (Use with P/N 1203) (Allows WW collets to be held in the tailstock) |
0.11 |
$102.37 |
|
|
2086 |
8mm
COLLET TAILSTOCK ADAPTER (Use with P/N 1203) |
0.11 |
$110.07 |
|
|
2090 |
8.0mm
COLLET TO ¾-16 THREAD (For mounting Sherline chuck on watchmaker’s or jeweller’s lathe that
takes 8.0mm collets) |
0.23 |
$81.54 |
|
|
2091 |
10mm
“D” COLLET TO ¾-16 THREAD (For mounting Sherline chuck on watchmaker’s or jeweller’s lathe that
takes 10mm D collets, not for use on Sherline lathe.) |
0.23 |
$89.24 |
|
|
2092 |
8.0mm
COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker’s or jeweller’s lathe
that takes 8.0mm collets, not for use on Sherline lathe.) |
0.23 |
$81.54 |
|
|
2093 |
10.0mm
COLLET TO 3/8-24 THREAD (For mounting chuck with 3/8-24 thread on watchmaker’s or jeweller’s
lathe that takes 10mm D collets, not for use on Sherline lathe.) |
0.23 |
$89.24 |
|
|
2094 |
CLOCKMAKER’S
GEAR CUTTING ARBOR, 7.0mm to Morse #1 (Arbour for use on watchmaker or jeweller’s
lathes to hold round gear cutter, Not for use on Sherline lathe) |
0.23 |
$112.35 |
|
|
2095 |
CLOCKMAKER’S
GEAR CUTTING ARBOR, 7.0mm to 10mm “D” Collet (Arbour for use on
watchmaker’s or jeweller’s lathes to hold round gear cutter. Not for use on
Sherline lathe) |
0.23 |
$112.35 |
|
|
2096 |
CLOCKMAKER’S
GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW Collet (Arbour for use on
watchmaker’s or jeweller’s lathes to hold round gear cutter, not for use on
Sherline lathe) |
0.23 |
$112.35 |
|
|
|
||||
|
|
||||
|
2100 |
WW
¾” COLLET POT CHUCK (Collet pot chucks are like small chucks custom
turned to hold a particular part. The part is held in a depression turned in
the surface of the pot chuck and does not go all the way through. Includes
dowel pin to clamp on while turning to size.) |
0.03 |
$54.45 |
|
|
2101 |
WW
1” COLLET POT CHUCK (See 2100) |
0.03 |
$57.52 |
|
|
2102 |
WW
1-1/4” COLLET POT CHUCK (See 2100) |
0.03 |
$62.15 |
|
|
2103 |
10mm
¾” COLLET POT CHUCK (Not for use on Sherline lathe) |
0.05 |
$70.38 |
|
|
2104 |
10mm
1” COLLET POT CHUCK (Not for use on Sherline lathe) |
0.05 |
$78.08 |
|
|
2105 |
10mm
1-1/4” COLLET POT CHUCK (Not for use on Sherline lathe) |
0.05 |
$85.79 |
|
|
2106 |
LIVE
CENTER-TO-8mm COLLET (A live centre for watchmaker’s or jeweller’s lathes.) |
0.11 |
$133.17 |
|
|
2107 |
LIVE
CENTER-TO-10mm COLLET (A live centre for watchmaker’s or jeweller’s lathes.) |
0.11 |
$133.17 |
|
|
2110 |
W.R.
SMITH WATCHMAKER’S T-REST (Used on Sherline lathes to support a hand-held “graver”, a
traditional watchmaker’s tool. Turns Sherline lathe into a first class watch
or clock maker’s lathe. Designed by famed craftsman W.R. Smith. Graver-making
instructions included.) |
0.45 |
$332.49 |
|
|
2118 |
THE HOROLOGICAL MILLING MACHINE BUSHING AND DEPTHING ACCESSORY |
0.04 |
$140.93 |
|
|
2125 |
MICROSCOPE
AND LATHE MOUNT (Mounts to table of either 4000 or 4400 series lathe. Magnifies work
area using high quality stereo microscope. Microscope is complete with stand
and eyepieces for use as a separate inspection scope as well as being mounted
on the lathe.) |
11.34 |
$1,435.92 |
|
|
2126 |
MICROSCOPE
MOUNT FOR LATHE
(Does not include microscope. Designed for microscope offered by Sherline.) |
1.36 |
$236.69 |
|
|
2127 |
MICROSCOPE
AND MILL MOUNT
(Mounts to headstock on any Sherline mill. Adjusts up/down and swings over
90° from centre front to side view. Microscope is complete with stand and
eyepieces for use as a separate inspection scope as well as being mounted on
the mill.) |
11.34 |
$1,574.52 |
|
|
2128 |
MICROSCOPE
MOUNT FOR MILL
(Does not include microscope. Designed for microscope offered by Sherline.) |
1.36 |
$389.14 |
|
|
2200 |
RADIUS
CUTTING ATTACHMENT (For cutting ball ends, convex and concave radii on ends of parts and
even complete balls) |
0.45 |
$209.28 |
|
|
2250 |
QUICK
CHANGE TOOL POST w/ 3 holders (Saves time when changing tools. Holders included for 1/4"
cutter, round boring tool and cut-off tool. Cutting tools not included.) |
1.36 |
$443.05 |
|
|
2251 |
QUICK
CHANGE TOOL POST RISER (Brings quick-change tool post up to proper centreline height when
using a riser block under the headstock for cutting larger diameters.) |
0.79 |
$108.29 |
|
|
2256 |
RIGHT-HAND
35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to cut
hard-to-machine materials like stainless steel) |
0.11 |
$86.97 |
|
|
2257 |
LEFT-HAND
35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert) (Use in 7600 tool post. Carbide is used to
cut hard-to-machine materials like stainless steel) |
0.11 |
$86.97 |
|
|
2258 |
PAIR
OF RIGHT- and LEFT-HAND 35° 3/8" CARBIDE INSERT TOOL HOLDERS (Includes one 55° insert per
holder) (Replacement inserts, P/N 7605) (For use with P/N 7600 toolpost.) |
0.23 |
$127.75 |
|
|
|
||||
|
2259 |
80°
CARBIDE INSERT 3/8" ROUND BORING TOOL, 1/2" min. hole, carbide
insert included (Use w/ P/N 7600 tool post) |
0.07 |
$109.17 |
|
|
2260 |
55°
CARBIDE INSERT 3/8" ROUND BORING TOOL, 3/4" min. hole, carbide
insert included (Use w/ P/N 7600 tool post) |
0.07 |
$109.17 |
|
|
2261 |
PAIR
OF ABOVE 80° (P/N 2259) AND 55° (P/N 2260) 3/8" ROUND BORING TOOLS w/
inserts |
0.11 |
$163.98 |
|
|
2265 |
3/8"
NEGATIVE RAKE CERAMIC INSERT TOOL HOLDER (Includes one 3-sided ceramic insert for six cutting
surfaces.) (For cutting very hard metals like tool steel. Has a 3/8"
shank for use in P/N 7600 tool post.) |
0.11 |
$110.07 |
|
|
2266 |
CERAMIC
3-SIDED REPLACEMENT INSERT For 2265 Holder |
0.02 |
$38.96 |
|
|
2267 |
3/8"
THREADING AND GROOVING INSERT TOOL HOLDER (Inserts not included. 3/8" shank requires
P/N 7600 Tool post.) |
0.074 |
$97.61 |
|
|
2268 |
60°
CARBIDE THREADING INSERT for 2267 holder (2 sides) |
0.02 |
$51.27 |
|
|
2269 |
.031"
CARBIDE GROOVING INSERT for 2267 holder (2 sides) |
0.02 |
$51.27 |
|
|
2270 |
.062"
CARBIDE GROOVING INSERT for 2267 holder (2 sides) |
0.02 |
$51.27 |
|
|
2280 |
1/4"
QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250) |
0.45 |
$116.88 |
|
|
2282 |
3/8”QUICK
CHANGE (square) TOOL HOLDER |
0.45 |
$116.88 |
|
|
2285 |
3/8"
QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250) |
0.45 |
$116.88 |
|
|
2290 |
QUICK-CHANGE
CUT-OFF TOOL HOLDER (Incl. w/ 2250) |
0.45 |
$147.68 |
|
|
2295 |
CARBIDE
INSERT HOLDER
for QUICK-CHANGE TOOL POST |
0.45 |
$163.08 |
|
|
3001 |
POWER
FEED (120V.) (for
240V. see P/N 3011) (Single direction motor drives lathe lead screw
.9" per minute to provide smooth final cut on long parts. Not designed
for use with thread cutting attachment.) |
2.23 |
$199.41 |
|
|
3002 |
CUT-OFF
TOOL & HOLDER (for cutting off work piece from the raw stock from which it was
turned. Often called a "parting tool".) |
0.11 |
$94.67 |
|
|
3003 |
TWO-POSITION
TOOL POST
(Holds two 1/4" cutting tools for quicker tool changes) |
0.11 |
$42.31 |
|
|
3004 |
KNURLING
TOOL HOLDER
(Makes knurled finishes. Includes one set of spiral knurls. Other sizes and
patterns available) |
0.11 |
$133.17 |
|
|
3005 |
1/4"
SQ. HIGH SPEED STEEL TOOL BLANK (Sharpen yourself on a bench grinder for
standard or custom-shaped tools) |
0.03 |
$20.56 |
|
|
3006 |
CARBIDE
TOOL SET (3
PC) (LH, RH, 60° THREADING) (Carbide tips are brazed to 1/4" tool shanks.
For cutting hard materials) |
0.17 |
$49.65 |
|
|
3007 |
HIGH
SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING) (Pre-sharpened to save you time. For cutting
most materials) |
0.05 |
$55.00 |
|
|
3008 |
TWO-POSITION
TOOL POST, 5/16" - 3/8" (Holds 5/16" tool on one side, 3/8" on
other side. Allows use of tools other than 1/4") |
0.11 |
$56.17 |
|
|
3009 |
CUTTING
TOOL HEIGHT GAUGE (Used to assure tool tip on resharpened tools is set to proper centreline
height. Works with both regular or riser tool post) |
0.11 |
$45.39 |
|
|
3012 |
HOLD-DOWN
SET (Simple
strap clamp set for clamping parts to table for milling. Includes 2 clamps,
T-nuts and assorted length bolts) |
0.17 |
$57.35 |
|
|
|
||||
|
|
||||
|
3013 |
STEP
BLOCK HOLD-DOWN SET (This
is a smaller version of the sets used on most full-size mills. Quicker to use
than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly.
Spare block included to be cut to custom sizes) |
0.45 |
$86.08 |
|
|
3015 |
TOGGLE
SWITCH DUST SEAL (Use to keep fine dust out of speed control on/off switch when
cutting brass or wood) |
0.03 |
$29.03 |
|
|
3016 |
CUT-OFF
TOOL REAR MOUNTING BLOCK (Allows 3002 cut-off tool to be mounted on "back" side of crosslide where it is out of the way and can be left in
place for easy parting off. Cut-off blade mounts upside down for use in this
position) |
0.05 |
$39.59 |
|
|
3017 |
CROSSLIDE
ACCESSORY PLATE
(Strengthens and protects lathe table when used for milling with vertical
milling column. Not for use during lathe operations as tool post height will
be incorrect.) |
0.45 |
$86.08 |
|
|
3018 |
REAR
MOUNT CUT-OFF TOOL AND HOLDER |
0.11 |
$94.67 |
|
|
3020 |
SHERLINE
"T" DRIVER (5/32" hex driver with T-handle adjusts majority of 10-32 screws
on Sherline tool. |
0.05 |
$25.74 |
|
|
3021 |
CENTRE
DRILL SET (3 PC.,
#1, #2, #3 double-ended) (Centre drills don't wander off centre when starting
holes. 60° tip makes proper hole to match dead or live
centre tips for turning between centres) |
0.03 |
$40.58 |
|
|
3035 |
SPUR
DRIVER (A quick
way to drive wood parts when turning between centres.) |
0.11 |
$56.17 |
|
|
3038 |
WOOD
TOOL REST (3" & 5" REST) (Supports hand-held wood cutting tools for wood
turning) |
0.34 |
$106.91 |
|
|
3047 |
EXTENDED
WOOD TOOL REST SET (For use w/ 1291) (Like 3038 only with longer shafts to match height
of headstock with riser block in place) |
0.11 |
$110.07 |
|
|
3049 |
BORING
HEAD (Metric)
(For enlarging holes to a precise inside diameter, uses 3/8" round
boring tools) |
0.23 |
$127.75 |
|
|
3050 |
VERTICAL
MILLING COLUMN
(Metric P/N 3053) (Converts your lathe into a 3-axis mill in less than 30
seconds.) |
3.63 |
$319.05 |
|
|
3050-CNC |
VERTICAL
MILLING COLUMN, CNC READY (Metric P/N 3053-CNC) Converts lathe into a 3-axis mill. Stepper
motor mount is ready to accept NEMA 23 frame size stepper motor for CNC
control |
4.08 |
$459.04 |
|
|
3052 |
FLY
CUTTER (For
quickly milling large, flat surfaces.) |
0.23 |
$73.84 |
|
|
3053 |
VERTICAL
MILLING COLUMN
Metric Converts your lathe into a 3-axis mill in less than 30 seconds |
3.63 |
$319.05 |
|
|
3053-CNC |
VERTICAL
MILLING COLUMN, CNC READY Metric Converts lathe into a 3-axis mill. Stepper motor mount is ready
to accept NEMA 23 frame size stepper motor for CNC control |
4.08 |
$459.04 |
|
|
3054 |
BORING
HEAD Inch
(For enlarging holes to a precise inside diameter, uses 3/8" round
boring tools) |
0.23 |
$127.75 |
|
|
3055 |
MORSE
#1 BLANK (Turn
on lathe and/or mill slots to make your own custom fly cutter, slitting saw
holder or special tool holder) |
0.23 |
$44.58 |
|
|
3056 |
T-NUTS, 10/32 (Set of 10) |
0.03 |
$28.26 |
|
|
3057 |
ROCKER
TOOL POST
(Rocking insert with two screws allows adjustment of tool tip height for
accurate turning. Eliminates shimming. Included on Model 4400/4410 lathes) |
0.11 |
$63.87 |
|
|
3058 |
4-JAW
HOLD DOWN SET
(Two angle clamps with T-nuts to clamp 4-jaw vice to any position on mill
table. Included with 3551 mill vice) |
0.05 |
$25.74 |
|
|
3060 |
MILLING
COLLET SET
(3 PC), (Metric P/N 3090) (1/8", 3/16", 1/4") (Milling collets
have a #1 Morse taper and are pulled into the headstock with a drawbolt. They do not have a through hole like WW
collets. They are used to hold specific size end mills or cutters.) |
0.05 |
$85.79 |
|
|
3061 |
BORING
TOOL—Max. Depth
.600, Min. Hole 1/4") (Use w/ P/N 3054 boring head) |
0.05 |
$39.59 |
|
|
3063 |
BORING
TOOL—Max.
Depth 1", Min. Hole 5/16" (Use with P/N 3054 boring head) |
0.05 |
$39.59 |
|
|
3064 |
BORING
TOOL—Max.
Depth 1.5", Min. Hole 5/16" (Use w/ 3054 boring head) |
0.05 |
$44.21 |
|
|
3065 |
SLITTING
SAW HOLDER
(Holds small, round saw blades for cutting thin slots) |
0.11 |
$79.27 |
|
|
3070 |
2.5"
Dia. x 1-5/16" STEEL BLANK (Chuck body) w/ 3/4-16 thread (A billet of 12L14
steel threaded for the Sherline spindle, ready to turn it into whatever tool
or part you need. A blank canvas for machinists.) |
0.91 |
$72.06 |
|
|
3074 |
Tool
holder for 1/4" or 3/8" Jacobs drill chucks (3/4-16 female thread to
3/8-24 male thread adapter replaces #1 Morse arbour to allow drill chucks to
be threaded on to outside thread of spindle to speed up tool changes on CNC
machines. No variation in drill length when changing tools back and forth.
Cannot be used with 5/32" Jacobs chucks as they do not have a threaded
back.) |
0.23 |
$73.84 |
|
|
3075 |
5/16"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
3076 |
6.0mm
END MILL HOLDER |
0.23 |
$66.14 |
|
|
3077 |
8.0mm
END MILL HOLDER |
0.23 |
$66.14 |
|
|
3078 |
10.0MM
END MILL HOLDER (Most common size metric tool holder) |
0.23 |
$66.14 |
|
|
3079 |
3/8"
END MILL HOLDER
(Most common size inch tool holder. 3/8" end mills are available from
many sources and are, therefore, the least expensive and available in the
largest selection.) |
0.23 |
$66.14 |
|
|
6079 |
1/4"
END MILL HOLDER
(Holds end mills in 3080 set) |
0.23 |
$66.14 |
|
|
6080 |
3/16"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
6081 |
1/8"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
3080 |
END
MILL SET (1/4" SHK) (1/8", 3/16", 1/4") |
0.03 |
$62.15 |
|
|
3087 |
3/32"
MILL COLLET |
0.03 |
$46.75 |
|
|
3089 |
5/32"
MILL COLLET |
0.03 |
$46.75 |
|
|
3090 |
3-PC.
METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm collets (See P/N 3060 for inch version
set and description.) |
0.07 |
$86.06 |
|
|
3091 |
7/32"
MILL COLLET |
0.03 |
$46.75 |
|
|
3092 |
3.0MM
MILL COLLET |
0.03 |
$40.58 |
|
|
3093 |
4.0MM
MILL COLLET |
0.03 |
$40.58 |
|
|
3094 |
6.0MM
MILL COLLET |
0.03 |
$40.58 |
|
|
3095 |
1/8"
MILL COLLET |
0.03 |
$40.58 |
|
|
3096 |
3/16"
MILL COLLET |
0.03 |
$40.58 |
|
|
3097 |
1/4"
MILL COLLET |
0.03 |
$40.58 |
|
|
3098 |
MILL
COLLET (Special Order .125 to .312) (Allow 3 weeks delivery) |
0.03 |
$77.54 |
|
|
3100 |
THREAD-CUTTING
ATTACHMENT (Being
able to cut threads on your lathe frees you from the expense of purchasing a
lot of expensive taps and dies for non-standard size threads. Cut just about
any thread, inch or metric, using this set of change gears. Hand crank wheel
included) |
1.36 |
$235.14 |
|
|
3200 |
INDEXING
ATTACHMENT
(Indexes in 5° increments, uses rack gear to turn rotation into measurable
linear movement for divisions other than 5° multiples. Includes base and
tailstock.) |
3.63 |
$396.05 |
|
|
3217 |
GEAR
TOOTH CUTTER HOLDER & HSS BLANK (Grind gear shape into tool blank and use on
mill in conjunction with indexing attachment or rotary table to cut your own
gears.) |
0.23 |
$73.84 |
|
|
3230 |
MILL
ARBOR-7/8" DIA. (Short) (Holds round mill cutters) |
0.23 |
$96.94 |
|
|
3231 |
MILL
ARBOR-7/8" DIA. (Long) (Holds round mill cutters) |
0.23 |
$96.94 |
|
|
3235 |
MILL
ARBOR-1" DIA. (Short) (Holds round mill cutters) |
0.23 |
$96.94 |
|
|
3236 |
MILL
ARBOR-1" DIA. (Long) (Holds round mill cutters) |
0.23 |
$96.94 |
|
|
3306 |
STD.
HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with
pulleys designed to turn the spindle at speeds up to 2800 RPM. Alternate pulley
position provides more torque and a maximum spindle speed of 1400 RPM.
Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) |
4.54 |
$568.22 |
|
|
3307 |
10,000
RPM HEADSTOCK, DC MOTOR AND SPEED CONTROL (Complete, self-contained drive unit with pulleys
designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley
position provides more torque and a maximum spindle speed of 2200 RPM.
Operates on any current 100VAC to 240VAC, 50 or 60 Hz.) |
4.54 |
$691.41 |
|
|
3400 |
OVERSIZE
HAND WHEEL
(2.5" diameter for easier cranking) (Metric P/N 3410) |
0.05 |
$39.59 |
|
|
3420 |
2"
ADJUSTABLE ZERO HAND WHEEL (Mill Y-axis or lathe crosslide) (Metric
P/N 3430) |
0.11 |
$71.57 |
|
|
3440 |
2.5"
ADJUSTABLE ZERO HAND WHEEL (Mill Y-axis or lathe lead screw) (Metric P/N 3450) |
0.11 |
$79.27 |
|
|
3460 |
2.5"
ADJUSTABLE ZERO HAND WHEEL (W/Thrust & Bearing Set for Mill Z-axis) (Metric P/N 3465) |
0.11 |
$86.97 |
|
|
3480 |
VERTICAL
MILLING COLUMN W/ADJ. HAND WHEEL (Metric P/N 3485) (Turns lathe into a mill in
less than 30 seconds. Normally used with 4500 or 4400 lathes to match adj.
Zero hand wheels) |
3.63 |
$349.84 |
|
|
3500 |
ROTARY
COLUMN ATTACHMENT (Allows mill column to be swung up to 90° to either side for angled
drilling) |
0.79 |
$154.49 |
|
|
3551 |
MILLING
VICE (Holds
work for milling. Looks similar to a drill press vice, but jaw pulls down and
in to keep parts from lifting during milling. Precise jaws and body can be
squared up with table.) |
1.13 |
$153.60 |
|
|
3559 |
90°
ANGLE PLATE
(Mounts parts 90° to table for milling) |
1.81 |
$205.72 |
|
|
3560 |
MILL
TOOLING PLATE
4” X 10” (Protects mill table, pre-drilled hole pattern makes it easy to
clamp parts, mount mill vice or rotary table to mill.) |
1.13 |
$130.50 |
|
|
3561 |
Short
90° Angle Plate |
0.45 |
$116.88 |
|
|
3562 |
MILL
TOOLING PLATE
7” X 13” (Protects mill table, pre-drilled hole pattern makes it easy to
clamp parts, mount mill vice or rotary table to mill.) |
4 |
$360.02 |
|
|
3570 |
ROTATING
MILL VICE BASE
(Holds mill vice while allowing it to be rotated 360° using laser engraved scale
for angle reference) |
0.45 |
$178.49 |
|
|
3575 |
ROTATING
MILL VICE BASE AND MILL VICE (P/N 3551) (Save by buying vice and base at same time) |
1.13 |
$292.20 |
|
|
3580 |
MULTI-DIRECTION
DELUXE VERTICAL MILLING COLUMN (Turns your lathe into an 8-direction mill in 30 seconds) (Metric P/N
3585) |
5.9 |
$710.95 |
|
|
3700 |
4"
PRECISION ROTARY TABLE (72:1 worm gear divides a circle into 3600 parts
without interpolation. Used for indexing radial hole patterns or milling
radii or indexed flats. Used on 3701 or 3750 to index for cutting gear
teeth. |
3.63 |
$511.54 |
|
|
3700-CNC |
4"
PRECISION ROTARY TABLE, CNC-READY (Includes stepper motor mount ready for
application of your own stepper motor and CNC controls. Hand wheel also
included) |
4.5 |
$615.79 |
|
|
3701 |
RIGHT
ANGLE ATTACHMENT (For use with P/N 3700) (Mounts rotary table perpendicular to mill
table) |
1.36 |
$158.14 |
|
|
3702 |
RIGHT
ANGLE ADJUSTABLE TAILSTOCK (For use with P/N 3700) (Aligns with centre of rotary table when
mounted on 3701. Supports arbour shaft used to hold gear blanks when cutting
teeth) |
0.91 |
$149.07 |
|
|
37091 |
12mm
to 3/8-16 ADAPTER (Allows Unimat Chuck with 12mm thread to be
mounted to Sherline rotary table P/N 3700) |
0.11 |
$40.76 |
|
|
37092 |
14mm
to 3/8-16 ADAPTER (Allows Unimat Chuck with 14mm thread to be
mounted to Sherline rotary table P/N 3700) |
0.11 |
$40.76 |
|
|
37093 |
1/2-20
ROTARY CHUCK ADAPTER (Allows Sears Chuck with 1/2-20 thread to be mounted to Sherline
rotary table P/N 3700) |
0.11 |
$40.76 |
|
|
37094 |
3/8-24
ROTARY CHUCK ADAPTER (Allows Jacobs Drill Chuck with 3/8-24 thread to be mounted to
Sherline rotary table P/N 3700) |
0.11 |
$40.76 |
|
|
3750 |
TILTING
ANGLE TABLE
(Mount part, mill vice, chucks or rotary table to mill any angle from 0° to
90°. In 90° position, holds rotary table at same height as 3701, eliminating
the need for that part) |
1.13 |
$207.51 |
|
|
40040 |
Replacement
Drive Belt |
0.07 |
$29.26 |
|
|
4017U |
MILL
SADDLE LOCKING LEVER UPGRADE (Allows Z-axis lead screw to be locked with a lever on the lead screw
instead of tightening a screw with a hex wrench. Standard on all mills after
1998) (Metric P/N 4117U) |
0.23 |
$58.44 |
|
|
4017Z |
CNC
MILL ANTI BACKLASH ADJUSTER UPGRADE (Allows the Z-axis locking lever to be positioned
in partially locked positions to reduce backlash to as little as .001".
Standard on CNC mills after 2/04. Can be installed as an option on any
Sherline mill.)(Metric P/N 4117Z) |
0.23 |
$73.84 |
|
|
4150 |
15"
LATHE VINYL COVER (Protect your 4000-series lathe from dust and grit) |
0.11 |
$33.06 |
|
|
4151 |
24"
LATHE VINYL DUST COVER (Protect your 4400-series lathe from dust and grit) |
0.11 |
$36.15 |
|
|
4335 |
10,000
RPM PULLEY CONVERSION (High speed position allows motor to turn spindle
at a maximum of 10,000 RPM. Second belt position provides more torque and a
maximum of 2200 RPM. New 2-piece standoff replaces standard motor standoffs.
Installs in about 10 minutes. |
0.45 |
$147.68 |
|
|
4360 |
CHIP
GUARD (Clear
shield contains flying chips. Pivots out of the way when not needed. Not a
substitute for safety glasses) |
0.23 |
$43.04 |
|
|
4417Z |
CNC
LATHE BACKLASH ADJUSTER (Installs on lead screw to provide a way to reduce backlash during
CNC operations. Similar to the 4017Z lock developed for the mill, it uses a
lever which is tightened against the saddle nut to control backlash. A
positioning arm holds the locking lever in any desired position. Installed on
all CNC-ready lathes as of 5/04. Can be installed as an option on any
Sherline lathe.) (Metric P/N 4417ZM.) |
0.23 |
|
|
|
|
||||
|
|
||||
|
$73.84 |
||||
|
|
||||
|
|
||||
|
|
||||
|
45260 |
15"
Extended Mill Column Bed (Manual) |
0.91 |
$218.36 |
|
|
45261 |
15"
Extended Mill Column Bed (CNC) |
0.91 |
$223.91 |
|
|
45270 |
15"
Extended Column Leadscrew (Manual, Inch) |
0.23 |
$63.06 |
|
|
45280 |
15"
Extended Column Leadscrew (Manual, Metric) |
0.23 |
$63.06 |
|
|
45290 |
15"
Extended Column Leadscrew (CNC, Inch) |
0.23 |
$63.06 |
|
|
45291 |
15"
Extended Column Leadscrew (CNC, Metric) |
0.23 |
$63.06 |
|
|
5011U |
MILL
X and Y AXIS STAR GEAR BACKLASH UPGRADE (Installs on mills made after 1997 when the pointer style backlash
lock was replaced with the star gear type lock and up until July, 2004 when
this change was incorporated into regular production. Includes new star gears
and lead screw nuts with finer teeth for mill X and Y axis plus new button
head screws to hold the locking gear.) (Metric 5111U) |
0.05 |
$31.71 |
|
|
5090 |
MILL
ACCORDION WAY COVERS (protects Y Axis led screw from chips) |
0.23 |
$97.95 |
|
|
51171 |
LEADSCREW, X-AXIS, CNC (Metric) |
0.23 |
$49.82 |
|
|
51172 |
LEADSCREW, X-AXIS 18", CNC
(Inch) (See 54182 for 18"
mill table) |
0.23 |
$89.24 |
|
|
51173 |
LEADSCREW, X-AXIS 18", CNC (Metric) (See
54182 for 18" mill table) |
0.23 |
$89.24 |
|
|
5150 |
MILL
VINYL COVER
(Protects your 5000-series and 5400-series mill from dust and grit) |
0.11 |
$36.15 |
|
|
5151 |
MILL
VINYL COVER
(Protects your 2000-series mill from dust and grit) |
0.11 |
$40.76 |
|
|
5200 |
XY
BASE (10")
(Inch) (Add a 3050 vertical milling column and the motor/speed control from
your lathe and you have a model 5000 mill)(Metric P/N 5210) |
7.71 |
$570.18 |
|
|
5200-CNC |
XY
BASE (10") CNC READY (Inch) w/ 2 stepper motor mounts for NEMA 23 frame size stepper
motors. (Stepper motors and CNC controls not included.) (Metric P/N 5210-CNC) |
9.07 |
$828.42 |
|
|
5201 |
XYZ
BASE (10") (Inch) (Add the motor/speed control from your lathe and you have a model
5000 mill)(Metric P/N 5211) |
11.79 |
$882.91 |
|
|
5201-CNC |
XYZ
BASE (10") CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size stepper
motors. (Stepper motors and CNC controls not included.) (Metric P/N 5211-CNC) |
12.23 |
$1,276.99 |
|
|
5220 |
XY
BASE (10") W/ ADJUST. HAND WHEELS (Metric P/N 5225) (Add a vertical milling column
with adjustable hand wheels and the motor/speed control from your lathe and
you have a complete model 5500/5510 mill) |
8.62 |
$703.84 |
|
|
5230 |
XYZ
BASE (10" W/ ADJUST. HAND WHEELS (Metric P/N 5235) (Add the motor/speed control
from your lathe and you have a complete model 5500/5510 mill) |
11.79 |
$967.60 |
|
|
5300 |
HOME MACHINIST'S HANDBOOK by Doug Briney
(275 pages, B/W, uses Sherline tools in all the setup examples, project plans
included) |
0.91 |
$72.06 |
|
|
5301 |
TABLETOP MACHINING by Joe Martin (The ultimate miniature
machining book by Sherline's owner. All colour,
8-1/2 x 11, 400+ photos, 200+ illustrations. |
1.36 |
$104.25 |
|
|
5305 |
MACHINE SHOP
ESSENTIALS—Questions and
Answers, by Frank Marlow, PE |
1.40 |
$109.65 |
|
|
5306 |
MACHINE SHOP
TRADE SECRETS, by James A. Harvey |
1.30 |
87.70 |
|
|
5325 |
SHERLINE TOOLS & ACCESSORIES CATALOGUE, 6th Edition (48-page colour
catalogue shows tools and accessories plus tells briefly how each is used.
Current price lists enclosed.) |
0.23 |
$23.02 |
|
|
5326 |
SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition (44-page colour
instruction book included with new machines. A good basic course in
machining) |
0.23 |
$23.02 |
|
|
5327 |
SHERLINE SHOP GUIDE (144 pages, B/W, 8.5 x
11" perfect bound book incorporates illustrated instructions from all of
Sherline's major accessories.) |
1.36 |
$58.04 |
|
|
5328-DVD |
STEAM ENGINE VIDEO by Rudy Kouhoupt
(DVD, 3 Hrs., includes materials list and printed
plans for a steam engine. Video takes you through every setup from start to
finish.) |
0.68 |
$141.29 |
|
|
5329-DVD |
SHOP SECRETS—Using Measuring Tools by Mike Rehmus
(DVD, 112 min., tells you how each measuring tool used in machining is used
and cared for. Very professionally produced. Includes promo for NAMES show
too. DVD version |
0.45 |
$86.08 |
|
|
5330 |
SAFETY
GLASSES (A
MUST in every shop. Get them from us or get them from someone else, but don't
cut metal without them! These are good quality and comfortable.) |
0.11 |
$29.22 |
|
|
5335 |
SHERLINE LATHE BASICS—How to Set Up and Operate
the Sherline Lathe by Mike Rehmus (DVD, 3.6 hrs., basic setup
operations, alignment, turning facing and boring plus segments on work
holding, tapers, threading, removing chuck jaws, backlash and more. Segments
on using a follower rest and milling on a lathe also included.) |
0.23 |
$96.86 |
|
|
5401 |
DELUXE
XY BASE
(Inch) w/ 12" Base and Adjustable Hand wheels (Add a 3480 vertical
milling column and the motor/speed control from your lathe and you have a
complete deluxe model 5400 mill.) (Metric P/N 5411) |
8.62 |
$773.14 |
|
|
5401-CNC |
DELUXE XY BASE CNC READY w/ 2
stepper motor mounts for NEMA 23 frame size stepper motors. (Stepper
motors and CNC controls not included.) (Metric P/N 5411-CNC) |
9.53 |
$960.70 |
|
|
54182 |
18"
Extended Mill table (Manual or CNC) |
0.91 |
$333.86 |
|
|
5420 |
DELUXE
XYZ BASE
(Inch) w/ 12" Base and Adjustable Hand wheels (Metric P/N 5430) (Add the
motor/speed control from your lathe and you have a complete deluxe model 5400
mill.) |
12.25 |
$1,024.43 |
|
|
5420-CNC |
DELUXE
XYZ BASE CNC READY (Inch) w/ 3 stepper motor mounts for NEMA 23 frame size
stepper motors. (Stepper motors and CNC controls not included.) (Metric P/N
5430-CNC) |
12.7 |
$1,347.68 |
|
|
5600 |
Model
2000 8-DIRECTION MILL XY BASE (metric P/N 5610) (Add a multi-direction vertical milling column and
the motor/speed control from your lathe and you have a complete model 2000
mill.) |
9.98 |
$831.18 |
|
|
5600-CNC |
Model
2000 8-DIRECTION MILL XY BASE (metric P/N 5610-CNC) (Same as above except stepper motor mounts are
installed on the X- and Y-axes, ready to accept NEMA 23 stepper motors.
Includes two 1-5/8" hand wheels for use on rear shafts of stepper
motors. Motors not included.) |
10.43 |
$1,071.26 |
|
|
5625 |
Model
2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630) (Add the motor/speed control from your lathe and
you have a complete model 2000 mill.) |
15.42 |
$1,517.66 |
|
|
5625-CNC |
Model
2000 8-DIRECTION MILL XYZ BASE (metric P/N 5630-CNC) (Same as above except stepper motor mounts are
installed on the X-, Y-, and Z-axes, ready to accept NEMA 23 stepper motors.
Includes two 1-5/8" hand wheels for use on rear shafts of stepper
motors. Motors not included.) |
15.88 |
$1,703.84 |
|
|
5650 |
8-DIRECTION
UPGRADE for
all existing SHERLINE MILLS (metric P/N 5660) (A multi-direction
milling column and an offset base brings your existing mill up to the
capabilities of a model 2000 mill.) |
4.08 |
$528.33 |
|
|
5680 |
8-DIRECTION
UPGRADE for LATHE VERTICAL MILLING COLUMN (metric P/N 5685) (Turns your lathe/vertical
milling column combination into an 8-direction mill.) |
4.08 |
$528.33 |
|
|
6079 |
1/4"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
6080 |
3/16"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
6081 |
1/8"
END MILL HOLDER |
0.23 |
$66.14 |
|
|
6100 |
HORIZONTAL
MILLING CONVERSION |
5 |
$338.59 |
|
|
6700 |
CNC
UPGRADE KIT, 5000 OR 5400 MILL (Metric P/N 6710) (Replaces the hand wheels with stepper motor
mounts, ready for the installation of your own stepper motors and CNC
control.) |
1.13 |
$438.50 |
|
|
6705 |
CNC
UPGRADE KIT, 2000 MILL (Metric P/N 6715) (Replaces the hand wheels with stepper motor
mounts, ready for the installation of your own stepper motors and CNC
control.) |
1.13 |
$438.50 |
|
|
|
||||
|
67127 |
STEPPER
MOTOR, 2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, pre-wired with plug for use with
Sherline rotary or linear controller, flats pre-machined for Sherline coupler
and hand wheel set screws. |
0.45 |
$155.38 |
|
|
67130 |
STEPPER
MOTOR, 2 amp,
#23 Frame, dual shaft, 6-wire, 136 oz-in stall
torque, 6-wire plug-in harness with raw leads for use on applications that do
not have the Sherline 5-pin connector plug, flats pre-machined for Sherline
coupler and hand wheel set screws. |
0.45 |
$139.98 |
|
|
6720 |
CNC
UPGRADE KIT, 4000 or 4500 LATHE (Metric P/N 6725) (Replaces the hand wheels with
stepper motor mounts, ready for the installation of your own stepper motors
and CNC control.) |
0.91 |
$356.96 |
|
|
6730 |
CNC
UPGRADE KIT, 4400 LATHE (Metric P/N 6735) (Replaces the hand wheels with stepper motor
mounts, ready for the installation of your own stepper motors and CNC
control.) |
0.91 |
$372.36 |
|
|
6740 |
CNC
UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only (Metric P/N 6745) |
0.68 |
$198.42 |
|
|
6750 |
CNC
UPGRADE KIT, 2000 Series Mills, Z-axis only (Metric P/N 6755) |
0.68 |
$198.42 |
|
|
6760 |
CNC
UPGRADE KIT,
mill X axis or lathe Crosslide only (all models)
(Metric P/N 6765) |
0.45 |
$150.76 |
|
|
6770 |
CNC
UPGRADE KIT,
mill Y axis only (all mill models) (Metric P/N 6775) |
0.45 |
$150.76 |
|
|
6780 |
CNC
UPGRADE KIT, lead
screw axis only, 4000/4500-series lathes (Metric P/N 6785 |
0.45 |
$240.08 |
|
|
6790 |
CNC
UPGRADE KIT, lead
screw axis only, 4400-series lathes (Metric P/N 6795) |
0.45 |
$255.48 |
|
|
7506 |
SET
OF MACHINIST'S PARALLELS (Sets of two parallel bars in five different sizes sized for
miniature machine tools. Used to support work a known distance above and
parallel to the table.) |
0.11 |
$95.00 |
|
|
7550 |
Super-Lube
multi-purpose synthetic grease with Syncolon® (PTFE), 3 oz tube
(Teflon-based grease that we use at the factory on all new machines. Clear,
non-staining, heat resistant.) |
0.11 |
$25.38 |
|
|
7555 |
Super-Lube
dri-film spray lubricant with Syncolon® (PTFE),
11 oz aerosol can (Teflon-based film that sprays on. Once
propellant dries, it leaves a thin coat of dry lubricant that won't attract
chips.) |
0.45 |
$36.80 |
|
|
7600 |
3/8"
INSERT HOLDER TOOL POST (Has side slot to hold 3/8" shank cutting tool holders plus a
3/8" round hole to hold round boring bars.) |
0.11 |
$48.47 |
|
|
7610 |
55°
NEGATIVE RAKE INSERT HOLDER w/ insert (Holds carbide tips for cutting hard materials like
stainless steel. 5° angle provides negative clearance for the cutter, which
is supported all the way down to the table for rigidity.) |
0.23 |
$112.35 |
|
|
7611 |
55°
DIAMOND TIPPED INSERT, fits in standard Sherline 3/8" tool holders designed to hold
55° carbide inserts |
0.02 |
$177.56 |
|
|
7612 |
REPLACEMENT
4-SIDED CARBIDE INSERT TOOL (for 7610) |
0.02 |
$42.12 |
|
|
7620 |
SINGLE
FLUTE INSERT FLY CUTTER (Carbide insert cuts hard materials. Also is a good compromise
between a fly cutter and an end mill, because it will cut a 1-1/8" wide
path while still being able to cut right up to a shoulder.) |
0.23 |
$112.35 |
|
|
7622 |
REPLACEMENT
2-SIDED CARBIDE TIP (for 7620) |
0.03 |
$39.85 |
|
|
8100 |
3-AXIS
DIGITAL READOUT w/ RPM GAGE FOR MILL (inch) (Metric P/N 8160) (Reads table position
to .0005", electronic compensation for backlash) |
1.36 |
$635.54 |
|
|
|
||||
|
8200 |
2-AXIS
DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch) (Metric P/N 8260) (Reads table position
to .0005", electronic compensation for backlash) |
1.36 |
$558.55 |
|
|
8210 |
3-AXIS
DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch) (Metric P/N 8215)
(Reads table position to .0005", electronic compensation for backlash) |
1.36 |
$650.94 |
|
|
8220 |
2-AXIS
DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOX (For those who already have a Mill
DRO package) (Inch) (Metric P/N 8225) (Reads table position to .0005",
electronic compensation for backlash) |
0.91 |
$287.67 |
|
|
8240 |
Z-AXIS
VERTICAL MILLING COLUMN DIGITAL READOUT HAND WHEEL PACKAGE (Inch) (Metric P/N 8245) (Adds
third readout for those who bought 2-axis DRO and later add a vertical
milling column.) |
0.23 |
$120.05 |
|
|
8700 |
CNC
ROTARY INDEXER w/
CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY, CABLES, 4" ROTARY TABLE AND
HOLD-DOWNS (Inch) (Stand-alone system with its own built-in computer is user
programmable. A computer controlled stepper motor indexes the rotary table to
within ±.006°. Can be daisy-chained with linear controller to do gear
cutting.) |
7.71 |
$1,286.28 |
|
|
8710 |
CNC
ROTARY INDEXER RISER PLATE (On the 3700-CNC and 8700 CNC rotary tables, the bottom of the
stepper motor mount extends slightly below the bottom surface of the table.
On Sherline mills, the mount overhangs the side of the table so this is not a
problem. On larger mills or flat table applications a riser plate is needed
so that the stepper motor clears the table surface.) |
0.91 |
$72.06 |
|
|
8730 |
CNC
ROTARY TABLE WITH STEPPER MOTOR (Stepper motor plugs into 4th axis cable of 8760
driver box or Sherline 8540 or 8020 CNC system to act as 4th axis. Includes
pre-wired plug. |
4.53 |
$760.71 |
|
|
8760 |
CNC
4-AXIS DRIVER BOX (Includes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel
cable for attachment to computer's printer port. Linux OS and EMC 4-axis
software also included on two CD's. |
3.18 |
$1,002.97 |
|
|
8765 |
Upgrade
any CNC-ready Sherline lathe to CNC (Computer not included.) Includes 2
stepper motors, 4-axis 8760 driver box, Linux/EMC
software on CD. |
5.44 |
$1,248.58 |
|
|
8770 |
Upgrade
any CNC-ready Sherline mill to CNC (Computer not included.) Includes 3
stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. |
6.8 |
$1,391.31 |
|
|
8775 |
Upgrade
any CNC-ready Sherline shop package to CNC (Computer not included.) Includes
5 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does
NOT include software installation and technical support. (To upgrade manual
3700 rotary table ask to substitute 8730 table with stepper motor for
additional charge of $300) |
7.26 |
$1,600.60 |
|
|
8800 |
CNC
LINEAR CONTROLLER w/ STEPPER MOTOR (Inch) (Stepper motor bolts onto Sherline CNC-ready
stepper motor mounts. Controller drives stepper motor to move any axis on
lathe or mill. From .0005" to 9.9995". Will work on any lathe or
mill axis that already has a stepper motor mount installed. Includes power
supply and cable. Can be daisy chained with other Sherline linear or rotary
controllers.) |
2.27 |
$769.21 |
|
|
8850 |
CNC
MILL OR LATHE POWER FEED (MILL X- or Y-AXIS or LATHE CROSSLIDE) w/ STEPPER MOTOR, MOUNT,
COUPLER, CONTROLLER, CABLES AND POWER SUPPLY (Replaces hand wheel on X- or
Y-axis of mill or lathe crosslide
with stepper motor mount and stepper motor. Motor is driven by self-contained
computer/keypad unit and power supply to allow movement from .0005" to
9.9995". Includes drill block for locating mounting holes. Can be daisy
chained with other Sherline controllers) Inch version only |
2.72 |
$862.98 |
|
|
8860 |
CNC
MILL POWER FEED (Z-AXIS, 5000/5400 MILLS) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER,
CABLES, POWER SUPPLY AND REPLACEMENT Z-AXIS LEAD SCREW (Replaces hand wheel
on Z-axis of mill with stepper motor mount and stepper motor. Motor is driven
by self-contained computer/keypad unit and power supply to move Z-axis in
programmable .0005" increments up to full length of travel. Includes
drill block for locating mounting holes. Can be daisy chained with other
Sherline linear or rotary controllers.) Inch version only |
3.18 |
$879.77 |
|
|
8865 |
CNC
MILL POWER FEED
(Z-AXIS, 2000 MILL) w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER, CABLES, POWER
SUPPLY AND REPLACEMENT Z-AXIS LEAD SCREW (See description for 8860 above) |
3.18 |
$879.77 |
|
|
8870 |
CNC
LATHE LEAD SCREW POWER FEED, 4000/4500 LATHES, w/ STEPPER MOTOR, MOUNT,
COUPLER, CONTROLLER, CABLES, POWER SUPPLY AND REPLACEMENT 15" LEAD SCREW
(Replaces hand wheel on long lead screw of lathe with stepper motor mount and
stepper motor. Motor is driven by self-contained computer/keypad unit and
power supply to move the saddle from .0005 to 9.9995". Includes drill
block for locating mounting holes. Can be daisy chained with other Sherline
linear or rotary controllers.) Inch version only |
3.18 |
$895.17 |
|
|
8880 |
CNC
LATHE LEAD SCREW POWER FEED, 4400 LATHES, w/ STEPPER MOTOR, MOUNT, COUPLER, CONTROLLER,
CABLES, POWER SUPPLY AND REPLACEMENT 24" LEAD SCREW (See
description for 8870 above.) |
3.18 |
$910.57 |
|
|
8900 |
HIGH
SPEED ENGRAVING HEAD AND SPINDLE, Includes headstock, spindle, 3 carbide
engraving cutters, 7 grinding tools, 2 collet wrenches,
6' air line and lubricator fitting. (For turning 1/8" carbide engraving
cutters at speeds up to 54,000 RPM. Replaces standard Sherline DC motor and
headstock unit.) |
1.59 |
$470.69 |
|
|
8976 |
TOOL
POST for 8900 High speed grinder, Mounts to lathe table to hold 8900 grinder horizontally as a tool
post grinder. |
0.11 |
$79.27 |
|
|
8987 |
RISER
TOOL POST for
8900 high speed grinder, taller post mounts to lathe table to hold 8900 grinder
horizontally when lathe has riser blocks in place. |
0.23 |
$81.54 |
|